Map Pilot Pro relies on the Autel SDK and the DJI SDK for hardware control and video transmission. That means we can only support the hardware that DJI/Autel adds appropriate Waypoint or Virtual Stick support for.
DJI stopped adding iOS support for new devices back in March of 2021. Feel free to let DJI know that iOS support and support for your aircraft is important to you as a user. Read more here: https://developer.dji.com
If you don't see your aircraft/camera listed here that means it is not supported the DJI SDK which allows us to talk to it.
Support List:
- Mini 2
- Mini 3 (RC Pro or N1 remote - Android only)
- Mini 3 Pro (RC Pro or N1 remote - Android only)
- Mini 4 Pro (RC Pro or N2 remote for Android only, Export Only for iOS)
- Mini 5 Pro (Export Only)
- Air
- Air 2
- Air 2S
- Air 3 (Export Only)
- Air 3S (Export Only)
- Mavic Pro
- Mavic 2 (Pro, Zoom, and Enterprise)
- Mavic 2 Enterprise Advanced
- Mavic 3 (Export Only)
- Mavic 3 Pro (Export Only)
- Mavic 3 Classic (Export Only)
- Mavic 4 (Export Only)
- Mavic 3 Enterprise (on M3E remote)
- Mavic 3 Enterprise Thermal (on M3E remote)
- Mavic 3 Multispectral (on M3M remote)
- Matrice 4 Enterprise (on M4E remote)
- Matrice 4 Thermal (on M4T remote)
- Phantom 3 Professional
- Phantom 3 Advanced
- Phantom 3 Standard
- Phantom 4
- Phantom 4 Pro * (v2 included)
- Phantom 4 Advanced
- Phantom 4 RTK
- Inspire 1
- Inspire 1 Pro
- Inspire 2
- M30 (on DJI RC Pro remote)
- M30T (on DJI RC Pro remote)
- Matrice 100 (M100)
- Matrice 200 (M200, including V2)
- Matrice 210 (M210, including V2)
- Matrice 210 RTK (M210RTK)
- Matrice 600 (M600)
- Matrice 600P (M600P)
- Matrice 300 (M300 - Elite only)
- Matrice 350 (M350 - Elite only - Android only)
- Matrice 400 (M400 - Elite only - Android only)
- Autel EVOII V1 ( no V2 or V3 support)
Supported DJI Remotes:
- RM500 Smart Remote with supported aircraft
- RM510 Smart Remote with supported aircraft
Supported External Cameras:
- Autel EVOII Dual (Pro level and up)
- Autel EVOII Base
- Autel EVOII Pro
- DJI X3
- DJI X5 (Pro level and up)
- DJI X4S
- DJI X5S (Pro level and up)
- DJI X7 (Pro level and up)
- DJI XT2 (Pro level and up)
- DJI P1 (Elite only)
- DJI L1 (Elite only)
- H20/H20T (Elite only)
- Sony a7R, a7R II, and a7R III only with Drones Made Easy Ninja OBC trigger board*
- Sony A6000 only with Drones Made Easy Ninja OBC trigger board*
- Sony Multispectral Camera (MSZ-2100G) as part of the Drones Made Easy and Sony Smart Agriculture Solution
Commonly requested devices that cannot be supported due to DJI not enabling 3rd party app support:
- Mini 2 SE
* Matrice 200/210/600/600P with Sony a7R and other custom camera sensors will require a Drones Made Easy custom trigger board that will only be sold as fully integrated kits built by Drones Made Easy. Email for more details and read about the Ninja OBC here: https://support.dronesmadeeasy.com/hc/en-us/articles/115000617223-What-is-the-Ninja-On-Board-Computer-
* Phantom 4 Pro v2 is supported. Phantom 4 Pro Plus version is not supported.
DJI makes a lot of firmware and SDK changes and they are not always backwards compatible. We try our best to stay on top of these changes but if any issues are encountered on supported aircraft, please give us a detailed report so we can try to fix the issue.
X5 RAW is not explicitly tested with and is not necessarily supported.
From the Github page for the SDK:
P4P v2.0 support should come in the iOS SDK v4.6. v4.5.3 was just released to support an app-store rejection issue. I have not heard anything concrete on when v4.6 will be released.
Map Pilot version 2.8.3 has been released and supports the Phantom 4 Pro v2.
Hi. Any idea when you'll be able to add support for the Spark?
We do not plan on supporting the Spark due to its limited image quality and super slow rolling shutter.
Will this be compatible with P4RTK at some point?
Hi, Have an estimated date for launch to support the Phantom 4 RTK.
Greetings.
Hi there, when we will get update of Tag Pilot? We tested our Phantom 4 Pro v2 in 17 Apr 2019 and it did not work. It does not support Marvic 2 Pro too. Thanks,
Good Morning Drone Community. Does the Map Pilot App work with the new DJI Smart Controller?
The Smart Controller does not allow external connections to iOS devices so Map Pilot will not work with it.
Amigo tengo un phanton 4 advanced el programa no me sirve se corta en todo momento hago el plan de vuelo y el dron no se eleva q puede ser eso
"TudorAugust 17, 2016 17:34
DJI has not added support for the Z3 camera to the SDK. We can't add it until they do so."
Hello there...
I have damaged my X3 camera and are now basically forced to use my Z3 with my Inspire 1.
I also realise that all my current equipment are basically EOL, but I still need to squeeze a little more out of the I1 before it becomes a rather expensive book end...
After starting up my MapPilot for the first time in years, I notice you guys included a "custom camera" setup.
Do you perhaps have the manual settings I can use for my Z3 please?
Kind regards and thanking you in advance.
HB
I got error Exited Programme Flights in both my Phantom 4 Pro V1 and V2. What could be wrong.
Error screenshot: https://ibb.co/Srt6LQW
Can I expect support of Phantom 4 Multispectral in the future?
What about p4 rtk.. Dose the app support it?
Items that are on the list are the ones that are officially supported. We occasionally provide beta support for other devices for Drones Made Easy customers.
You are going to add the DJI Mavic Air 2 to the list?
We would love to but DJI has said they will not be supporting waypoint flight with the Mavic Air 2.
https://support.dronesmadeeasy.com/hc/en-us/community/posts/360072065151-Mavic-Air-2-support
If the Mavic Air 2 did not receive waypoint flight. It's almost safe to assume DJI makes no plans to include it with the new Air 2S Drone? Having a lot of buyers remorse at the moment and wish I did more research.
We are assuming that the Mavic Air 2S will not have waypoint support either. DJI appears to be making this a distinction between their classes of aircraft. It is basically them saying that the Air series isn't really to be used for professional work.
We are currently recommending users use the Copterus app which uses virtual RC to fly the aircraft. It won't work out nearly as far and has other drawbacks but at least you can do a decent mapping mission with non-waypoint aircraft.
In your defense, the didn't exactly publicize that difference at the time...
any plans to support the M300 RTK? there don't seem to be many options out there, and i am a big fan of using Map Pilot Business for our M600 Pro operations.
Hello
does it support the DJI Air 2S ?? Can I plan grid or linear flights?
Thank you
I have a trial version of Map Pilot Pro. I'm testing it with a DJI Phantom 3 Pro and a DJI Mavic 2 Zoom.
The P3P uploads the flight path, will take off, hover at height (200 ft), and then immediately lands.
The Mavic 2 Zoom fails to even get to the point of uploading the flight path. The app either quits or times out (with an error that "Autel aircraft require an active internet connection").
The drones, the controllers the app, and the iPad have been restarted and the problem remains. DJI Go4 id not running while MPP is.
I have the flight logs for the P3P and a screen video of the Mavic 2 Zoom failing if that helps.
This thread is closed for comments. If you have a question please post it in a new thread or contact us at mapping@dronesmadeeasy.com