Bài đăng

2 người theo dõi Theo dõi
0
Avatar

not continue the mission

Hello!
When I on mission what is need more thean 1 battery, after the the battery changed the drone not continue the misson circle around the homepoint or just stay above the homepoint. Please help!

Horváth Bodó

Bình luận chính thức

Avatar

Make sure you let the aircraft land on its own. If you manually try to take over the waypoints will get out of sync. 

If there was any circling going on it is likely due to wind with the Virtual Stick controls. In that case you can just hit the RTH button to have it land. 

If the blue verification line does not show the flight you want to do you can always select any corner waypoint to have the flight restart there instead. 

https://support.dronesmadeeasy.com/hc/en-us/articles/115005940746-Manual-Restarting-Point

Zane
Thao tác bình luận Đường dẫn cố định

Vui lòng đăng nhập để lại bình luận.

5 bình luận

0
Avatar

When the drone tries to land on its own, it will be 2-3 metres off the take-off point, which is dangerous for the drone because it can get stuck in trees, weeds or rocks.

Horváth Bodó 0 bình chọn
Thao tác bình luận Đường dẫn cố định
0
Avatar

I tried it as you instructed, but it still won't continue, hovering in one place at 30 meters. The manual restarting doesn't work. I do it on iPad Air 3.

Horváth Bodó 0 bình chọn
Thao tác bình luận Đường dẫn cố định
0
Avatar

You should always try to have a good amount of clearance when you take off. Being 2 or 3 meters from trees sounds dangerous... 

Your flight logs all look pretty good. Please send us a link to one of the affected flights so we can see what is going on. 

You have to tap a corner waypoint when the blue verification line is showing to use the manual restart. 

 

Zane 0 bình chọn
Thao tác bình luận Đường dẫn cố định
0
Avatar

Check it again please I sync it the mission, or give me an email adress where can I send the airdata logs.

Horváth Bodó 0 bình chọn
Thao tác bình luận Đường dẫn cố định