Bài đăng

2 người theo dõi Theo dõi
0
Avatar

Map Pilot Pro - can not set lower Approach/Return speed for New Mission

Hello.

Overall I enjoy great functionality of Map Pilot Pro.

However I stumbled with one problem:

I can not set lower Approach/Return speed for New Mission I create.

I create new mission, set it parameters, enter speed  (Approach/Return one) lower than default 15 m/s. However, when I close this mission and reopen it I always see that my speed values (e.g. 4 or 5 m/s for Approach/Return) always defaults back to 15 m/s. 

When I fly this mission I see that it really at 15 m/s (not my much lower values). It it pretty disturbing since I prefer to approach and return at lower speeds than 15 m/s for additional safety.
Please, help me out.

Cheers.

Vladimir Sviridov

Vui lòng đăng nhập để lại bình luận.

4 bình luận

0
Avatar

Did you save the mission with your designated speed set?

When a mission is saved that is it, no further saving to that mission is done without creating a new mission. Adjustments that are made before flight are not saved unless the mission is unlocked and re-saved as a new entry. 

Is this not the behavior you are seeing?

Zane 0 bình chọn
Thao tác bình luận Đường dẫn cố định
0
Avatar

Hi Zane.
Thank you for reply.
Did you save the mission with your designated speed set? - Yes.
Many times, different devices (iPhones, iPads), two drones -  Mavic 2 Pro and Phantom 4 Pro v2. Newly created and saved mission rolls back to default 15 m/s for Approach/Return when I hit diskette. 
I tried to unlock mission and resave it with new name with needed Approach/Return speed. However it again rolled back to 15 m/s. 
I flied several of these mission and it speed to crazy 10-15 m/s when flying to start and from end point.

Vladimir Sviridov 0 bình chọn
Thao tác bình luận Đường dẫn cố định