Gimbal pitch is not fixed at the required angle

So 90 degrees is working but anything less than that is not? What happened if you manually tried to adjust it with the remote?

Ah well…basically it didn't work below -90 degrees with Inspire2. The intended angle of the gimbal pitch less than that was not reflected in the flight.So,the gimbal pitch did not follow the specified angle.
However,it was worked what I manually tried to adjust it with the remote.

BTW,I also tried M2P but it worked well.That sounds good!

Thanks,

I tried the latest version of MP (4.1.3) today, but the gimbal pitch still did not follow the specified angle with INSPIRE 2.
Even though I set it to 15 degrees, as a result it kept -90 degrees. It should be -75 degrees.The gimbal pitch of INSPIRE 2 seems to be locked at -90 degrees.

Thanks,

We were more concerned with fixing the yaw issues for the X cameras on the latest releases since they can't be adjusted manually. We will get this fixed though. 

Are you setting this before takeoff or after?

I set it before takeoff.
Wasn't it?