Bài đăng

2 người theo dõi Theo dõi
0
Avatar

Incomplete Map. Only half of the images got included and there is a hard edge where half of the map failed.

Incomplete Map. Only half of the images got included and there is a hard edge where half of the map failed.

I flew a Map Pilot mission on a DJI Mavic 2 Pro with 75% overlap with part of the mapped area containing tall trees. I assume the trees are the reason for the failure, though it seems odd that there is such a discrete line of failure in the middle of the map.
Would submitting these same images again in a new map produce a different (better) result or is this the best I can do with the current image set?

View the failed map and overlap report below

https://www.mapsmadeeasy.com/maps/public/3120942668184e7f981e1e13ca6e32a2

Thanks for all the help and creating such a great set of software products!

Brett Davis

Bình luận chính thức

Avatar

Whenever trees are involved we recommend using at least 80% overlap. This is noted in the Data Collection guidelines that are agreed to at the time of upload. Water is another issue here and is the #1 thing to avoid as noted in the Data Collection guidelines.

Your overlap report looks more like 60-65% overlap was used. 75% overlap would have resulted in a fully dark blue overlap report. Please send us the Map Pilot flight log if this is not the case. 

Zane
Thao tác bình luận Đường dẫn cố định

Vui lòng đăng nhập để lại bình luận.

3 bình luận

0
Avatar

Zane, thank you for the prompt reply and feedback. I definitely see that I should have used a higher overlap.
The mission was created with a 75% overlap. I have the kml, csv and mme files here. What is the best way to send them to you?

Brett Davis 0 bình chọn
Thao tác bình luận Đường dẫn cố định