SD Card read only

When I try uploading mission file to my Phantom 3 Pro, I get an error basically stating that the SD Card is read-only. The SD-Card is inserted, and I can take and record pictures and videos to my SD card just fine with the DJI Go App with no problems at all.

Stephen Hurd 22:02 Ngày 29 tháng 10 năm 2015

Bình luận chính thức

Disregard.

Thanks for your time--and sorry for wasting it.

I got the upload function to work if I took off in F-Mode with Map Pilot running. If I took off with the Go App running, then switched over to Map Pilot (and force closing Go App) and switching to F-Mode from P-GPS mode AFTER takeoff, it didn't work.

Also, I'm no longer getting the SD Read only error--just flew my first mission! Not sure why it's working now, but I'm not complaining!

Thanks again for your time.

Stephen Hurd 00:09 Ngày 30 tháng 10 năm 2015

Vui lòng đăng nhập để lại bình luận.

3 bình luận

That is the first we have heard of this happening. That is an error that is reported to Map Pilot by the DJI SDK. We ask the SD card for information and it either comes back with an error or the info we asked for.

Have you tried formatting the card using the DJI Go app?

Have you tried other cards?
Is you card at least a Class 10 card?
What version of Map Pilot are you using?
What firmware versions of the aircraft and remote?

Sorry for the barrage of questions but we need this info to figure out what is going on.

Tudor 22:13 Ngày 29 tháng 10 năm 2015 0 bình chọn

Yes, I've reformatted the card, I haven't tried another card yet, but once again the Go app works just fine with this current one. I've tested again (just in case coincidentally the SD card went bad).

Yes, it's class 10
Using Map Pilot 1.2.2
Aircraft: v1.4.0010
RC: 1.4.30

At this point I can't even try uploading any missions. I've even deleted all my saved missions, recreated a new mission, forced Map Pilot closed (all others already closed), restarted the P3P...

Stephen Hurd 23:26 Ngày 29 tháng 10 năm 2015 0 bình chọn