I have just flown a 3 battery mission using manual focus.
Flight 1 - In Focus
Flight 2 - Out of focus
Flight 3 - Out of Focus
110 meters. 1/500s. Infinity Focus (0)
How can flight 2 and 3 be out of focus when using the manual focus setting. Yes i confirmed manual focus was set after each battery change.
It is possible you were setting the manual focus early and the aircraft restart process wasn't completed yet. Try setting it once the aircraft is at the top of the climb.
We will look at when this is set and make adjustments if needed.
Por favor, entrar para comentar.
I confirmed multiple times during the climb the focus was set to infinity still as this is something that concerns me and can (and has) ruined this mission now. When setting focus depending how quick you slide your finger on the slider it sometimes jumps from 0 back to a higher number and you have to try again to get it to stick. Was 100% focus set to 0 (infinity)
Checked logs and can see these 2 entries relating to focus.
When it says "FocusFailed" is it trying to pull auto focus even though i set to MF ? Don;t see why i would get a focus failed message if MF is selected.
The Focus Pause is just part of the mission planning because 99.9% of flights are done using the Auto Focus. It is in there regardless of the focus mode setting.
We are looking into what might be going on here.
If you are getting that many wind warnings you shouldn't be flying anyway...
