Merging two flight plans in one map

HI,

Can I upload images from two different flight plans to create just one map? (With the same camera settings).

Will it work if in one of the plans the drone takes the pictures on the East-West axis, and in the other plan it flies in the North-South axis?

Nicolás Feldman 18 de janeiro de 2017 22:23

Comentário oficial

Yes. It should be fine as long as there is plenty of overlap between adjacent sections and the lighting is not wildly different.

Tudor 19 de janeiro de 2017 04:24

Por favor, entrar para comentar.

5 comentários

Thanks Tudor!

Will it matter if the take-off points are from different locations and altitude?

Nicolás Feldman 23 de janeiro de 2017 15:26 0 votos

Mixing altitudes may lead to some funkiness but it is not forbidden.

Zane 23 de janeiro de 2017 18:17 0 votos

Can you give me an idea of "plenty of overlap" in feet when joining two flight missions? Should the two areas have overlap each of 10, 20, or 30 feet ?

Also to make sure i have good coverage on the sides of what I am mapping how many feet should I go beyond what I accually want?

Thx in advance

Jimcosta2008 19 de julho de 2018 20:38 0 votos

I would make sure that a full pass lined up with the adjacent layout to make sure there aren't any issues. If the lighting was slightly different (it will be) having a lot of overlap will help make sure it matches up.

Make sure everything you want to cover is inside the polygon. The area outside of it will show up but won't have enough overlap to be sure it will turn out well. We trim off most of the junk.

Zane 19 de julho de 2018 21:40 0 votos