Linear Mission Overlap

I need high frontal overlap for my linear mission for good results. I also need to fly at a lower altitude than typical.

I set my frontal overlap rate ok but when I lower the mission altitude, it automatically lowers the frontal overlap slider.

Is there a way around this?

Thanks!

Mderks27 2020년 06월 10일 16:25

공식 댓글

If your altitude gets really low and the overlap is high the speed you can fly will be limited by the camera's ability to collect images (which is limited to 1 image per 2 seconds) and the aircraft's ability to fly slowly (limited to 2 m/s). It is adjusting it for you because you have reached that limit and you have to pick which is more important to you: altitude or overlap. You should prioritize overlap.

PS - I responded to this ticket on Saturday. Please check your spam filter and mark messages from us as OK.

Zane 2020년 06월 10일 16:33

댓글을 남기려면 로그인하세요.

댓글 2개

oops - ok and thank you for the information!

Mderks27 2020년 06월 10일 16:54 0 표