The frequency of the pictures taken was not even. I had a 90% overlap so I don't think it matters much. If I switch to the connectionless option can I still two finger focus the camera while it is paused overhead at the takeoff position. I am including a screenshot of the images photo positions. The conditions were ideal as far as wind (light to none) diffuse light, (overcast) speed was around 7.5 MPH shutter was 1/500 ISO auto f/5.6 altitide around 300' agl
I am finding that the double finger tap to focus, works well so I want to be able to keep doing that. Is the double finger tap available if I go connectionless. I fly in the northeast and there are frequently a lot of trees around. I initially tried this mission in the connectionless mode but the machine was not snapping pictures. I brought it back and reloaded the mission and went with a connection to fly. the photos turned out well.
댓글을 남기려면 로그인하세요.
If the image spacing is uneven while using Active Connect mode it is likely you either have an RC connection/interference issue or a SD card write speed issue. You might want to either slow down your flight a bit or make sure you are maintaining an RC signal % of greater than 95% to ensure proper spacing.
You can redo the focus while paused even in Connectionless mode.
