Hi,
I'm having an intermittent problem when flying a mission with my Phantom 4 pro v2. Once the mission has loaded, the A/C takes off to about 2-3 metres and then stops and the mission will not proceed. This often happens after a battery change. I have never had this problem with a Mavic Pro using Map Pilot.
I am using the latest IOS version and always make sure that the GO4 app is closed before loading Map Pilot.
Any help appreciated.
This sounds like something going on with the hardware to me...
You could try turning off the obstacle avoidance system since that has been known to cause some issues.
Otherwise, you could try a couple of flights on our Map Pilot Lite 4.0.1 that was released last week. It has some additional hardware diagnostic stuff that goes into the log file that might help you narrow down what might be the cause.
댓글을 남기려면 로그인하세요.
Thanks. I'm not sure it is a hardware issue as I had the same problem with another Phantom 4 pro v2. I'll try turning off obstacle avoidance next time to see if that helps
I've now flown the P4P numerous times with the front and rear obstacle avoidance sensors disabled and have not had any further issues. This seems to have solved the problem, Not a hardware problem. It might be worth mentioning this issue in your guidance.
Thanks for the help
