Connecting with an Inspire

While connecting to an Inspire 1, the connection seems to be erratic.
Planning estimator seems not to take into account the Inspire1 Hardware (is this estimator automatic and generic to the Phantom or Inspire?).

Adam 2015년 10월 19일 17:44

공식 댓글

Sadly, the connection issues are due to DJI firmware and not with our app. Make sure that you have the drone powered up and connected before starting our app to minimize problems.

There is no difference it estimating between the Phantom 3 and Inspire since they have the same sensor and lens geometry.

Tudor 2015년 10월 19일 17:57

댓글을 남기려면 로그인하세요.

Connecting with an Inspire

공식 댓글

댓글 1개