I've been a long time user of Map Pilot Pro for drones from the Phantom 4 to the M300. For the M300, I've used the iOS version for several years but recently upgraded to the RC Plus controller (required for L2 LiDAR payload use). Accordingly, I installed the enterprise Android version of MPP directly on the controller. Everything seemed fine, but I ran into issues in the field. I'll continue to troubleshoot, but wanted to see if there were suggestions.
First issue - camera focus failed. I tried switching between MF and AF, manually moving the focus bar to try to force it to focus on infinity, short/long pressing the shutter button to try to force an AF, etc. Nothing worked. Eventually, I just had to land. I tried restarting the controller, etc. but same issue. What did work is I re-opened the DJI Pilot app, switched between MF and AF and did a shutter short/long click to confirm the camera was working, then shut down DJI Pilot and restarted MPP. Then it was good to go.
Second issue - pretty quickly after a mission started (less than 5 minutes), the drone just stopped. Nothing near it so I don't believe it was obstacle avoidance, etc. I could still manually control the drone, but MPP would not take any inputs for the drone itself. I could open/close sidebars within MPP so the app was not frozen, but when I tried to Pause the mission, nothing happened (I figured maybe I could pause and restart the mission, but no luck). Since I couldn't pause it, it did not record a resume point either.
Harap masuk untuk memberikan komentar.
What camera are you using on the M300 that is having the issue?
The focus controls are weird sometimes. You have to really have a strong RC signal for it to work reliably.
Have you inspected your log files to see what the cause of the stopping might be?
I don't see any log files in your account so you would have to sync them if you want us to take a look.
