पोस्ट

2 अनुसरणकर्ता अनुसरण करें
0
Avatar

Adivises on automated flight,

Hi there,

 
    I am using Map Pilot Pro (Phantom 4 Pro) and yesterday i faced some issues:
 
      - VisionSys Dangerous
      - Drone GPS error
      - Gimbal module disconnected
      - Corner Radius Invalid (Turn Mode to straight)
      - When closed, I try to continue, but the second battery starts the plan by the beginning.
 
   Could you help-me to understand and find a solution to each one?
 
Thanks for your help,
Fernando Malta

आधिकारिक टिप्पणी

Avatar

The items that show up in the Aircraft Errors panel are things that are wrong on the aircraft that Map Pilot Pro cannot do anything about. They are reported by the aircraft as they come up. Some are OK. 

VisionSys Dangerous - This means the vision system is seeing something. Not surprising on the ground. Not good in the air. If it happens in the air that means you are either close to an object or the optics are dirty. We generally recommend turning the vision system off to prevent flight issues. 

Drone GPS error - this is usually a sign of onboard hardware issues. 

Gimbal module disconnected - not sure but probably a sign of a hardware issue.

Corner radius - please screenshot this and send it to us. Also screenshot your mission plan with the options panel open. 

It sounds like you might be landing by hand which is OK as long as the flight mode switch is back into programmed flight mode. Otherwise the app misses the event updates. If this happens you can restart at any corner:

https://support.dronesmadeeasy.com/hc/en-us/articles/115005940746-Manual-Restarting-Point

 

 

Zane
टिप्पणी क्रियाएं Permalink

कृपया टिप्पणी करने के लिए साइन इन करें करें.

2 टिप्पणियां

0
Avatar

Hi Zane, thanks for your support. I will check all things.

I am using a custom firmware (https://nolimitdronez.com/), I will try to use the original to check.

Fernando Malta 0 वोट
टिप्पणी क्रियाएं Permalink