Hi all,
I tried to use Map Pilot for DJI with my Mavic Pro 2 from mapping roads.
I made a flight mission in "linear flight" mode, on a path, with only two swipes, max distance (lenght from take off point) 1 km. During the first swipe the camera has remained in the nadiral position for all the time (correct). During the return (I didn't undestand the reason, wich is why I ask for help), to be precise, in the middle of the return swipe, the camera he positioned herself horizontally, without me changing anyting. Please, could you help me understand why it happened?
In an other case, a flight performed some minute ago, the same situation: a flight in linear mode with two swipes (lenght from the take off point 900 m), after about 400 m the same problem: camera from nadiral position, to horizontal position. (Note that this last fligh was performed from my terrace (at home) with the drone in view and in radio contact.
I didn't understand the reason, which is why I ask for help,
It is possible you hit the buttons on the bottom of the remote which are frequently set to bring the camera up to a level position. Also, if the aircraft initiated the return to home sequence this could happen automatically if it wasn't on the flight path anymore.
We don't see an account with your name so we can't look up your flight logs to help much more than guessing what might have happened.
कृपया टिप्पणी करने के लिए साइन इन करें करें.
Hello, now I'm registered. How I can show you my log?
"
Hi all,
I tried to use Map Pilot for DJI with my Mavic Pro 2 from mapping roads.
I made a flight mission in "linear flight" mode, on a path, with only two swipes, max distance (lenght from take off point) 1 km. During the first swipe the camera has remained in the nadiral position for all the time (correct). During the return (I didn't undestand the reason, wich is why I ask for help), to be precise, in the middle of the return swipe, the camera he positioned herself horizontally, without me changing anyting. Please, could you help me understand why it happened?
In an other case, a flight performed some minute ago, the same situation: a flight in linear mode with two swipes (lenght from the take off point 900 m), after about 400 m the same problem: camera from nadiral position, to horizontal position. (Note that this last fligh was performed from my terrace (at home) with the drone in view and in radio contact."
I tried to hit the button on the bottom of the remote in the Mavic Pro2 (called button C1) during the fly, but the camera rest in nadiral position!
So this can't be the reason of the problem.
Please can someone help me?
Thanks
Try turning off your obstacle avoidance system. If that gets triggered it might affect the gimbal.
You need to open the main screen of Map Pilot while logged in and connected to the internet. Be sure to enable Flight Sync in the settings.
