Hi Zane
Still having multiple issues with flights, even when steering clear of manual adjustments. I've been following your instructions from the last post but am still getting a flawless first flight and then the second flight it stops 40m from take-off. There is something going on and I am not manually trying to land it. If you look at the logs the first flight landed on it's own regardless of what your log is showing. The second, third fourth and fifth all had to be brought back. This has not always been the way with Map Pilot Pro. I've been able to manually bring the drone back and fly second third and fourth missions without any issues. Please look into this further, I've completed many missions successfully with this app, but something changed 5 months ago when I originally posted. Please help your app is great and I want to keep using it but I can't justify it if I can't get a simple flight done. Thanks as always for your help, and I look forward to your response.
कृपया टिप्पणी करने के लिए साइन इन करें करें.
I am looking at your synced missions and I don't see any recent flights that succeeded on the first flight but wasn't able to start on the second. Please share the link to the affected flight so we can take look.
I do see a few flights that the aircraft seems to just go out and then stop. We will take a look at it. There have been some changes to the Virtual Stick controls lately.
Was it windy at all while you were flying?
Thanks Zane
It wouldn't be the iOS version.
For your most recent weird flight, did you check the blue verification line before taking off and it looked as it should?
You could try using a different mobile device if you have one. Since you are doing Virtual Stick controlled flight with the Mini 2 it could be an issue with CPU availability. It looks like you are using an iPhone mini which we don't have a lot of experience with.
We are still looking into it.
Yes blue line everything was as it should be. Same phone Iphone 12 mini i've been using for the last two years. Another team member has an SE and he's experiencing the same issue. We did try with a samsung phone the other day but had connection issues and had a fly away right off the bat.
Hi Zane
Just following up on the last few comments. I noticed last night that you guys had an update 2 days ago. I was trying DroneLink with limited success, drone wasn't maintaining course. So we went back to my old faithful MapPilot Pro, yesterday. Happy to report we didn't encounter the same issues. I did however notice the drone was having trouble returning to the blue dot when continuing the mission. Patiently waited and it did continue the mission, flawlessly after that. Thanks so much happy to be able to utilize MapPilotPro again.
Thank you for the update. We made a lot of pretty big changes in how missions are resumed to allow for flights to be resumed in the air. Hopefully things are settling back down. We don't tend to make changes like this after peak season has started.
Would you care to elaborate on the "trouble" it had returning the blue dot?
Rather then flying directly to the blue dot it flew south of the point and then corrected and went to the point
We see that but we also see that you were getting some wind warnings in your log file. You need to keep an eye on your Aircraft Errors panel for important issues.
You were getting a lot of this:
dji_check_camera_encrypt_error_reason / dji_check_fc_strong_gale_reason
Here's a snip of what I'm talking about. Seemed to correct on the third and fourth flight
Yeah. We see that. It looks like it was fighting the wind trying to get back to the starting point slowly. 30 mph winds and Virtual Stick controls are not a good mix...
There was definitely less wind at the starts of flights 3 and 4.
This is all from AirData by the way.
