Publication

2 abonnés S’abonner
0
Avatar

Pilot

I use map pilot Pro for the most part it works very well! Currently starting about 6 months ago on startup I get the following message. 

"Detected camera mismatch the detected camera (P4PCamera) does not match the camera (Mavic Pro) used to save this mission. Do you want to update the saved mission?" Skip or update are my options. 

Why do I get this message? I fly a phantom 4 Pro. I went to update, and it appears that i have the correct camera listed. I chose the skip option, and it works with no problem. How do I fix this?

Jim Meade

Commentaire officiel

Avatar

The 'Skip' option will make it so you are flying with a narrower flight layout since the Mavic Pro has a narrower field of view. This would result it getting more overlap than you had planned on. 

The 'Update' option will make it right for the connected aircraft/camera. 

There was a version a while ago that had an issue with saving missions for the P4P. To fix it you can open it and say update. Then save it. Then you can delete the old one. 

 

Zane
Actions pour les commentaires Permalien

Vous devez vous connecter pour laisser un commentaire.

1 commentaire