What version is this?
Actions pour les commentaires
Publication
S’abonner
Latest version of MPP on Android _ DJI Mini 2 keeps re-linking during a mission
I was forced to update to latest MPP version yesterday. Everything working fine prior to this.
Ran a mission today and it kept saying "Aircraft Found" and wanting to fix a new home point and upload the mission. This would happen after about 10-15 images. I would upload again, the mission would recommence and then it would come up with "Aircraft Found" again.
New home points over water are concerning.
I tried to run a new separate adjacent mission and the same things kept occurring. I aborted, wasting a perfect flying day.
I had shut down DJI. I restarted MPP 3 times.
Vous devez vous connecter pour laisser un commentaire.
2 commentaires
After finding your flight logs it looks like you were using a really old version previously and 3.1.12a. We haven't heard of this behavior happening with anyone else on that version. Is it only doing this in the air or is it doing it on the ground too? What about in the air but in very close to the remote?
It does look like you have some low signal strength areas before the dropout in in your most recently posted flight and it is a significant distance away.
Please try to do a smaller flight in closer to the remote to make sure things are working well. Track the aircraft with the remote to maintain the strongest signal strength you can.
Actions pour les commentaires
