Hi there,
Yesterday I attempted to plan and fly a mission using our M300 and P1 and Altum (Dual gimbal mount). The mission height was set to 80m and I opted to use terrain following. The graph elevations and heights were checked and were correct prior to flight. The drone however attempted to fly the mission at 20m ATL/AGL. The drone also started the mission by flying backwards and then spinning around to fly forwards after approximately 10 seconds into the mission. I shut down everything, replanned the mission from scratch and unfortunately encountered the same result. The offset was set to 0m.
I replanned the mission for 100m and then the drone attempted to fly the mission at 40m ATL/AGL. The drone height did vary with the terrain however it was consistently 60m lower than the planned height.
Map Pilot Pro does not officially support the M300 yet because of various issues with the SDK.
There is all sorts of weirdness with it. We are working to support it but haven't released it while we are waiting on DJI to fix things.
I guess we need to take out the workaround of using the Custom Camera to connect to it...
Iniciar sesión para dejar un comentario.
