The frequency of the pictures taken was not even. I had a 90% overlap so I don't think it matters much. If I switch to the connectionless option can I still two finger focus the camera while it is paused overhead at the takeoff position. I am including a screenshot of the images photo positions. The conditions were ideal as far as wind (light to none) diffuse light, (overcast) speed was around 7.5 MPH shutter was 1/500 ISO auto f/5.6 altitide around 300' agl
I am finding that the double finger tap to focus, works well so I want to be able to keep doing that. Is the double finger tap available if I go connectionless. I fly in the northeast and there are frequently a lot of trees around. I initially tried this mission in the connectionless mode but the machine was not snapping pictures. I brought it back and reloaded the mission and went with a connection to fly. the photos turned out well.
Please sign in to leave a comment.
If the image spacing is uneven while using Active Connect mode it is likely you either have an RC connection/interference issue or a SD card write speed issue. You might want to either slow down your flight a bit or make sure you are maintaining an RC signal % of greater than 95% to ensure proper spacing.
You can redo the focus while paused even in Connectionless mode.
