Hello
Just recently every flight I take for a mission the first flight goes flawlessly. When I change battery for the second flight it goes up stops and just stays in 1 location. I had two drones on hand and tried the same thing happended. I checked the log files and there are no errors that indicate any issues. I used the app 3 or 4 weeks with no complications. I think the update 3 days ago has a bug when using IOS 16.6.1.
This 30m issue came up for someone else lately. Please read about it here:
https://support.dronesmadeeasy.com/hc/en-us/community/posts/17359865489684
tl;dr - Update all battery firmwares. Also, log out and log back into DJI using the DJI app.
Please sign in to leave a comment.
It looks like you were making a lot of manual stick adjustments which kicks you out of the automated flight mode. This makes it so things get out of sync. After this occurs you need to carefully inspect the blue verification line when defining the waypoints. If it is not going back to the abandonment point correctly you will need to use the Manual Restarting Point feature to pick a new place to start back up.
https://support.dronesmadeeasy.com/hc/en-us/articles/115005940746-Manual-Restarting-Point
You can tell this is happening in the flight logs on the Maps Made Easy site where it says "Switched Out of Flight Mode" : Yes.
Also, keep an eye on the Aircraft Errors panel. You had a LOT of wind warnings going on which is never good with virtual stick flight.
Thanks for the quick response Zane
Yes, that is what I am saying. It is either let it land on its own so it stays in sync or manually adjust the starting point if the blue line isn't correct. It has always been like this.
Ok thanks again Zane
I'll start manually adjusting start point. As mentioned I always land manually especially in snowy conditions to avoid landing the mini in snow. It's funny this has never happened before though. Have a great day and really appreciate the answers on a Sunday.
The issue has reappeared, it really never went away I had two flights that ran successfully and everyone after that second flight goes up and then stalls 30m from launch point. Another user has had the same problem, he has found a workaround where he swipes up on map pilot pro opens dji fly and then goes back into map pilot pro for his second flight. I'm nervous about leaving program because it wants to reset mission not continue from where it left off. I don't think it's dji fly that makes it work but a reset of the program that does. I haven't tested this but will trying it in the next couple of days. Please help.
