Official comment
That is a funny workaround idea that could work, but we don't explicitly support vertical mapping.
Comment actions
Post
Follow
Fly off building facades (vertical)
In the meantime, do you offer the possibility to fly facades and adjust the overlap etc.?
Or is there a trick? For example: set a path and then repeat it x-times and only change the alitude?
Please sign in to leave a comment.
6 comments
Thank you for the answer. I also think it could be possible.
Additional questions about "vertical" measurement:
- if the facade (or the building) has been successful processed as a 3D model, can I measure in the model? Areas, length, width, angles, volume, etc.?
- or is it even possible to create a wireframe model from the outer contours, which can then be imported into CAD?
Comment actions
We only do orthophoto mapping which does not allow for making measurements in the vertical direction in the web interface.
Comment actions
"We only do orthophoto mapping which does not allow for making measurements in the vertical direction in the web interface."
Demand: do I understand this correctly? Even if the building is available as a 3D model, it is ONLY possible to measure in plan view - i.e. 2D?
Comment actions
" .... is it even possible to create a wireframe model from the outer contours, which can then be imported into CAD?"
Is there an export function for CAD programmes?
Comment actions
Only horizontal measurements are available in the web interface. Elevation numbers are available by hovering but they are not something that can be marked up with the tools that are available.
If you want to make 3D measurements you can use any of the output files that are available.
https://www.mapsmadeeasy.com/outputs
https://support.dronesmadeeasy.com/hc/en-us/articles/11575283074708-How-do-I-view-the-results-
Comment actions
