Post

2 Follower Folgen
0
Avatar

Overlap Inspire pro

I´m not getting the correct overlap in length.

I´m using 15mm, 17mm, and 45mm with the setting 70% but the result is the same, around 50-55% in length and 70% sideways.

With the X3 camera, it works fine

Uni .Cw

Offizieller Kommentar

Avatar

Interesting. We will look into this.

The likely cause is that we have noticed that the X5 camera can have issues keeping up with the 2 seconds per images setting so you could try to select the slower setting (even if you have a fast card) to slow the aircraft down appropriately.

This slower writing would decrease the along track overlap while leaving the across track overlap closer to your set value.

Jay
Aktionen für Kommentare Permalink

Bitte melden Sie sich an, um einen Kommentar zu hinterlassen.

3 Kommentare

0
Avatar

If I make a mission in Mappilot with e.g. X5-15mm 70% , speed class 2,5 sec 60m then I get max speed 8.3 m/s and 35 pictures.

This can´t be right, my calculations shows max speed 6,2 m/s and 48 pictures. However if I calculate with the pixel width in length, then I get the same as Mappilot

Uni .Cw 0 Stimmen
Aktionen für Kommentare Permalink