منشور

‏2 متابعين اتباع
0
Avatar

Lost Signal during a mission

Needing some help..  As I was flying my mission (About 6 min in ) the cable disconnected from my controller. (Yes that was my fault ) I called the drone home. Reset everything to restart the mission, it will not let me restart from the beginning. It will only start from we lost connection. When I did that i was missing pictures. I had holes in my map. How can i restart from the beginning. Thank you for your time.    

Mark H.

تعليق رسمي

Avatar

We jump through all sorts of hoops to make sure people do not lose the progress they have already made. So it is good to hear that is working! But, if you want to start from the beginning you can just tap on the green dot while the blue verification line is showing to restart things from there. This is called the Manual Restarting Point feature. 

You can read more about it here:

https://support.dronesmadeeasy.com/hc/en-us/articles/115005940746-Manual-Restarting-Point

 

Zane
إجراءات التعليق ارتباط ثابت

الرجاء تسجيل الدخول لترك تعليق.

3 تعليقات

0
Avatar

Zane, Thank you very for the quick reply. That was part of my issue. I had holes in my mapping. Do you have a video on showing how to start a mission at a specific location?  Thanks again .. 

Mark H. 0 أصوات
إجراءات التعليق ارتباط ثابت
0
Avatar

There is no video on doing it. When the blue verification line is showing and it isn't where you want to go you can tap on any corner waypoint and have it start there instead. In your case of wanting to start over again you would click on the green dot. 

Zane 0 أصوات
إجراءات التعليق ارتباط ثابت