منشور

‏6 متابعين اتباع
0
Avatar

Map Pilot Business compatible Phantom 4 pro RTK

good morning.
 I have bought the Map Pilot business application and with which I have been working satisfactorily for years. I am going to acquire a Phantom 4 pro RTK and I have seen that in the specifications of the Business version it does not indicate the compatibility with the RTK through the DJI SDK and if it appears in the previous paid version.
Can you trust me?
Oscar Sánchez Morate

تعليق رسمي

Avatar

If I upload those corrected files, will I get a good solution through Maps Made Easy?

Yes, the outputs will get more accurate when more accurate data is provided. 

 

How do I send the base station GCP point so that it is properly referenced?

If your corrections are being done already by other software the location of the ground station has already been taken out of the equation.

Be sure to make sure the DJI camera is doing the camera corrections. The images should not look like a fisheye lens took them. We do not do this correction for you and would just process the imagery as it is provided. The fisheye looking images don't work as well as the camera corrected data. 

Zane
إجراءات التعليق ارتباط ثابت

الرجاء تسجيل الدخول لترك تعليق.

12 تعليقات

0
Avatar

The Phantom 4 Pro RTK is only currently supported if it was purchased from Drones Made Easy. 

Zane 0 أصوات
إجراءات التعليق ارتباط ثابت
0
Avatar

I have the Business version acquired through apple store, is it compatible with the sdk station? How do I add the RTK phantom?

Oscar Sánchez Morate 0 أصوات
إجراءات التعليق ارتباط ثابت
0
Avatar

Hi I have Map Pilot business and Phantom 4 RTK SDK controller. How to enable the RTK functionality in the app (through NTRIP)?

Linas Gelazanskas 0 أصوات
إجراءات التعليق ارتباط ثابت
0
Avatar

What if i do not buy the remote sdk from drones make easy? The app will never work with rtk?
Thanks

Nsem 0 أصوات
إجراءات التعليق ارتباط ثابت
0
Avatar

I would also like to know this.

Hi I have Map Pilot business and Phantom 4 RTK SDK controller.

Is rinex data stored for ppk processing? And is RTK functionality supported?

 

Thanks

 

Jason 0 أصوات
إجراءات التعليق ارتباط ثابت
0
Avatar

The RINEX data is not recorded. We wish it was but for some reason that isn't recorded using 3rd party apps. Only use of the DJI Groundstation is supported. Most other advanced setups still don't work because they are not supported by the DJI SDK. 

Zane 0 أصوات
إجراءات التعليق ارتباط ثابت
0
Avatar

Zane, what is the difference if purchased from Drones Made Easy?

Do you modify the firmware in some way?

Jason 0 أصوات
إجراءات التعليق ارتباط ثابت
0
Avatar

I don't understand? Does Rinex work in your version of the P4P RTK even though it's not supported in the DJI SDK?

Is RTK functionality supported in maps made easy for SDK version?

Jason 0 أصوات
إجراءات التعليق ارتباط ثابت
0
Avatar

RINEX info is not written when using 3rd party apps. 

RTK is supported on the P4RTK when using the DJI SDK remote. (dumb name) This is a separate remote that is required to use iOS devices. 

https://enterprise.dji.com/news/detail/dji-standard-remote-controller-for-phantom-4-rtk

You cannot use Map Pilot with the P4RTK unless the equipment is purchased from us because it requires a lot of support. 

Zane 0 أصوات
إجراءات التعليق ارتباط ثابت
0
Avatar

The RTK Base Station that I use with my P4 RTK is the RoboDOT (Navigation and Measurment | RoboDot (robota.us). It has been working very well for me. It records RINEX files and I send to OPUS for the position solution the next day, then RoboDOT has a utility that adjusts all the photo files to reflect the corrected position. If I upload those corrected files, will I get a good solution through Maps Made Easy? How do I send the base station GCP point so that it is properly referenced?

Chris Saurenmann, PE 0 أصوات
إجراءات التعليق ارتباط ثابت