منشور

‏2 متابعين اتباع
0
Avatar

Connecting with an Inspire

While connecting to an Inspire 1, the connection seems to be erratic.
Planning estimator seems not to take into account the Inspire1 Hardware (is this estimator automatic and generic to the Phantom or Inspire?).

Adam

تعليق رسمي

Avatar

Sadly, the connection issues are due to DJI firmware and not with our app. Make sure that you have the drone powered up and connected before starting our app to minimize problems.

There is no difference it estimating between the Phantom 3 and Inspire since they have the same sensor and lens geometry.

Tudor
إجراءات التعليق ارتباط ثابت

الرجاء تسجيل الدخول لترك تعليق.

تعليق واحد