map pilot pro 5.4.1 - wrong side overlap on linear mission plan

It is impossible to tell the difference here without seeing all of the settings for each layout. Is the altitude different?

In the bottom screenshot, the lines will show where the aircraft flies. It isn't going to magically fly something else. 

The best way to tell that the spacing is not changing between a normal and a linear mission is to make a layout and switch between the two types. You will see that the spacing of the lines is not changing. 

If you are seeing something different please provide screenshots. 

the settings are the same, altitude 120m, overlap 80/80, connectionless..

in linear mission plan the lines in the app shows ok, but the drone flies with other pattern.

see screenshot of nearby normal mission, for this type the dron fly as the path lines of plan

There is basically zero chance it just flew a different path. Please give use the links to the appropriate flights. 

Are these saved missions? Did you have the correct camera selected when you designed the mission?

In this flight it went up to 180 meters:

https://www.mapsmadeeasy.com/map_pilot/flights/detail/9F645391-0D3D-4216-9EF8-E0A774ECD3A9/

In this flight it went up to 120 meters:

https://www.mapsmadeeasy.com/map_pilot/flights/detail/1B5A3FFD-2CD3-4F6E-BEAE-5A8C46F43B44/

If you had a Ground Offset value in there it could cause this. The linear mission doesn't account for the Ground Offset. 

well it may be a temporary bug, but it happened,

this is the linear mission as planned

https://www.mapsmadeeasy.com/map_pilot/mission_plans/detail/73EB728D-E544-4A4F-B089-C48ED5F7B246/

and as flown:

https://www.mapsmadeeasy.com/map_pilot/missions/detail/E46B4562-2D40-4D97-B1FA-1325F421985B/

I will reinstall the app to test again

Are you 100% sure you don't have a Ground Offset value in there? You can't see that in Maps Made Easy. It would have been in Map Pilot Pro.