With the phantom 4 pro, I could use the C1 (gimbal 90 degree) and C1 (fpv / follow) keys. There was no angel for the flight and the autopilot. Today I bought the Phantom 4 pro V.2. Dji Go is working on it but doesn't react with mappilot. Why does this happen? The keys C1 and C2 are very important to me
Map Pilot does not support the use of those buttons. The gimbal angle can be viewed in the debug panel which is accessed by pressing and holding the top status bar for 8 seconds.
Vui lòng đăng nhập để lại bình luận.
