When using Map Pilot with my DJI Inspire 2 with the X5S camera and a 25mm lens, the software reports the GSD as 4cm/px, when it should be much closer to 1 cm/px. The software then calculates the overlap incorrectly, and the resulting image set is useless for 3D processing, because there is not enough overlap.
Is there a fix for this issue?
From what altitude? I am getting .8cm/px at 60m.
Are you sure you aren't running a flight that was designed for another lens and saved? When changing aircraft you need to re-layout any saved flights since the parameters won't match.
Vui lòng đăng nhập để lại bình luận.
I see that number as well, before I connect the inspire 2, Then when the "Aircraft Detected Inspire 2" message appears, the resolution jumps to 2.6 cm/px at 60m.
We will look into that and fix it if we can duplicate it. Sorry for the issue.
I have noticed this as well sometimes I have to cancel the app and come back and create new mission. Other time I just ignore the calculation and just fly the mission at the height.
