We are flying the Matrice 210 with the Zenmuse X5s gimbal.
We have the Olympus 45mm & 25mm lenses. The 25 is almost always used for photogrammetry. For the past few versions of the software we are always getting the following error at the start of a mission: "Error setting aperture to 1.7". That is understandable since the widest these two lenses can go is 1.8. Can the software be changed to inquire what the widest setting is for the lens and then open it to the widest setting instead of hard coding a wide setting?
This is one issue that in my opinion needs attention in addition to the others documented here:
https://support.dronesmadeeasy.com/hc/en-us/community/posts/360055512712/comments/360008635611
My hope is that you can work through these issues so we can continue to use this app. At the moment we have to pursue other apps.
Regards,
Greg S. Gloor, PLS
iniciar sessão para comentar.
The app asks the DJI SDK for a list of valid values to set the aperture to already. We only use the list of values that are provided. In a pinch you can use the right click wheel to adjust the exposure and lens values.
