Publicação

2 seguidores Seguir
0
Avatar

2.3.0 version for Android

Hello,

I have had some issues when using version 2.3.0.

1 - I was unable to resume a flight from the blue dot. The drone stopped above the blue dot and would not follow the mission. When restarting the mission, the drone went to the starting point and not to the blue dot. I tried several times without success.

2 - The option to restart from the stopping point (blue dot) or clear the mission does not always appear, which makes it difficult to operate. However, I managed to restart the mission several times so that the option appeared. Even so, I had the problem reported in point 1.

3 - When trying to create a new mission directly on the cell phone, the old mission was loaded, preventing the insertion of new points. To create the new mission, it was necessary to delete the old mission and restart the cell phone.

4 - The version history shows that version 2.3.1 was released on November 6th but it is not available for download (APK version).

Paulo Jorge Vaitsman Leal

Comentário oficial

Avatar

1. If you manually fly the aircraft back to the landing things will get out of sync and it may not want to return to the blue dot. Let it land on its own to keep it from getting out of sync. If it does get out of sync you can tap on any corner waypoint while the blue verification line is showing to restart there instead. It is a little weird because you didn't even make it through the first leg of the flight before returning home. 

2. See #1. 

3. You could save the mission and then run it from there. That way you could unlock the mission if you need to modify it. 

4. That version hasn't been widely released yet and is still in testing. 

Zane
Ações de comentário Permalink

Por favor, entrar para comentar.

3 comentários

0
Avatar

Zane,

1. I didn't fly manually, when I noticed the deviation from the route, I pressed the RTH button.

3. In fact, I just needed to do another mission to test, since the one I had wasn't working. But as the mission was being loaded even though I entered the "new mission" option, I was unable to create a new flight plan.

Paulo Jorge Vaitsman Leal 0 votos
Ações de comentário Permalink
0
Avatar

I am seeing that the sticks were touched during landing your log files. 

Also, you are getting warnings that are likely affecting things:

 FlySafeWarningEvent: TAKE_OFF_IN_ENHANCED_WARNING_ZONE The aircraft is in the enhanced warning zone (Airport)_ please pay attention to flight safety. zones:1

If you have partial progress it will keep it if you don't clear it out with the unlock/trash buttons. 

Zane 0 votos
Ações de comentário Permalink