Publicação

2 seguidores Seguir
0
Avatar

Aircraft encoder error and flight ending prematurely

Dear, I am having two problems frequently:
1 - The "aircraft encoder error" appears continuously.
2 - Sometimes, when taking off, the aircraft warns that the flight has been completed and it heads towards the starting point and stops there. When this happens, I have difficulty landing because as it approaches the ground it rises again to RTH height.

Thank you for your time

Paulo Jorge Vaitsman Leal

Por favor, entrar para comentar.

1 comentário

0
Avatar

1. This indicates an issue with the hardware on the aircraft. Please make sure all of your firmwares are fully up to date and that you are using a high quality cable that is in good shape at both ends. This can also have to do with the strength of the RC signal so be sure to operate well within the limits of your aircraft. 

2. Make sure all other drone related apps are fully closed on your device when using Map Pilot Pro. This can also happen if you get kicked out of programmed flight mode for some reason or you have touched the sticks on a virtual stick controlled aircraft. 

In general it sounds like you have some hardware issues going on. Please share the links to the affected flight lots in our system so we can see what is going on. 

Zane 0 votos
Ações de comentário Permalink