Publicación

2 seguidores Seguir
0
Avatar

LIDAR on an M600...

My partner and I are going to begin using MapPilot for LIDAR mapping missions via the M600 Pro.  We haven't begun field testing, but right off the bat I'm concerned about the "no camera detected" error message.  Is there any way around this?

We're using v2.9.2 business edition.

Regards,

Donnie

Donnie

Comentario oficial

Avatar

Do you have a DJI camera connected? It isn't an issue as long as you are using the Business version.

Your real issue will be in determining camera and overlap settings that will work for you. 

If you were not using the business version you would have to purchase the Cameraless Takeoff In App Purchase. 

https://support.dronesmadeeasy.com/hc/en-us/community/posts/360007069346-Map-Pilot-2-8-0-won-t-load-mission-after-declining-camera-less-takeoff-in-app-purchase

https://support.dronesmadeeasy.com/hc/en-us/community/posts/360001392163-Map-Pilot-In-App-Purchases

Zane
Acciones de comentarios Permalink

Iniciar sesión para dejar un comentario.

3 comentarios

0
Avatar

It is a

RunCam 2 HD Camera (RNC1002)

connected via the AV port.

 

D

Donnie 0 votos
Acciones de comentarios Permalink
0
Avatar

To get the proper overlap you will need to provide the app with the resolution, pixel pitch and focal length of the camera. 

Zane 0 votos
Acciones de comentarios Permalink