Post

2 followers Follow
0
Avatar

3 missions withou any pictures

I’m using iPad Pro and mavic 2 pro to try map one area and after 3 missions the drone took no pictures at all, during mission tests i can see camera on app but after the flights there are no photos at all. I’m using a map pilot at last version and drone at last version softwares.

rodrigocolenbh

Official comment

Avatar

Are you 100% sure you have all other drone related apps fully closed?

From the flight logs we have in our system it looks like the telemetry signal is being lost immediately after taking off which is why nothing is happening. You have to maintain a solid RC connection. 

There appears to be one flight that did take some images. What was different about that one. 

It looks like you are trying to use 90-95% overlap. Have you tried using smaller values?

Zane
Comment actions Permalink

Please sign in to leave a comment.

4 comments

0
Avatar

Yeas they was fully closed, i tried two ways, using online map pilot, and closing map pilot after taking off and opening DJI Go app, the drone make all the path and take no pictures, i was thinking about my Sd card, actually is a Sandusky ultra a1, u1 class 10. During all fly with Map Pilot the screen didont move with the drone, but on others tests after closing map pilot the DJI go show the full path and drone way. 

I was always near the fly area, because is a small area so RC connection may not the problem, what could make my signal loss for Map Pilot but not to DJI Go ?

this could be any iOS configuration? Should i remove DJI Go Software from IPad and left it only on iphone if i need to take over? 

True one fly came with 1 photo, but i think i pressed de picture button on remote control. I tried with less overlap, i can do it near my home with very less like 60% to test.

rodrigocolenbh 0 votes
Comment actions Permalink
1
Avatar

Did you try it in a slightly larger area and using a lesser overlap setting? If you are flying super low and with high overlap it is possible there could be issues. Not with the connection but with the minimum distances. 

Also, try the simulator. 

Zane 1 vote
Comment actions Permalink
0
Avatar

I changed my sd card to a U3 card very much faster, and i've tested near my home using in a very small area, flying higher and with less overlap 80% i think. it worked. i took many pictures and im now trying to mount them on metashape. Thank you! I Think one very importante think is using a very fast sd card on drone. 

rodrigocolenbh 0 votes
Comment actions Permalink