M300 Compatibility

Thanks for the answer.
Do you have a plan to support L1 and P1?

We will support the P1 as long as DJI lets us be a dealer for it. We are still undecided on the L1 until we use it but are leaning towards yes. Again, be sure to purchase your equipment from us for support. 

Any update on supporting the H20T or the P1 for the M300?

We plan on supporting the H20T when the DJI SDK is capable of allowing us to do so. It is so new and has so many different features that it might be a bit. DJI seems to be making large changes to the general SDK surrounding its release. The P1 will be supported if we are a dealer.

Has any progress been made in your intention to support the matrice300 with P1, L1, H20,...?

Did DJI set you as a dealer?

Does SDK allow you to use it?

Have the waypoint bugs been fixed?

DJI still has not updated the SDK to work with any of these items. 

We now have a beta going with preliminary M300 support for the H20 and H20T cameras. 

Download the Test Flight app from the app store and then click the button for step 2 here to gain access. 

https://testflight.apple.com/join/14SRyZN6

Make sure you download version 5.0.9. The M300 SDK still has a lot of issues with it and not all controls are present. 

Can Map Pilot Pro work with PSDK based 3rdPayload for Matric 300 like Sony RX1 camera or etc? Becouse of DJI Pilot app is very bad design!!!! And an issue in Map Pilot Pro settings menu,custom camera is, the user can't add the camera higher than width 9000px!!!!  want to add a custom camera 61MP and 9504px width but 400-9000px supported.

Probably. We will look at upping the max resolution for the custom camera. 

I tried today to use M300 + my PSDK camera in TestFight APP + MP pro 5.2.

Connecting to M300 was good but uploading botton loaded with delay and some issue!

I want to use Map pilot pro for mission creating and uploading to drone with a camera trigger(1.2 second or more) only and next I want to use DJI pilot in SMART RC for changing camera setting in flight and FPV camera live view.

my PSDK camera has custom psdk menu and only DJI pilot can know this menu and will work with it for changing camera ISO, shutter, aperture setting.

But map pilot show error in way point uploading for more than 100 way point but my mission has 53 waypoint only!

And map pilot crashed after pressing upload botton!

Thank you for the feedback. The waypoints thing is certainly an issue and we will look at that. We have done zero testing with any PSDK payloads so for so I am not sure what you should be expecting to see there. The crash could be related to it looking for a camera. The other reason it could be crashing is that the subscription check isn’t working properly yet. I don’t see a subscription associated with your account but the Elite level will be required to use the M300. We are giving people temporary access for the purposes of beta testing so be sure to email us with the account you are using. 

Welcome!
Yes, I used another email for MapPilot Pro and Now I'm sending message with this email synced with Map Pilot Pro and Beta testing.
We know, M300 support up to 65000 waypoints in waypoint v2, but Map pilot send a warning for 53 waypoints for me in M300RTK!
I told you in last message, there is a custom menu in my psdk camera that no third-party app like map pilot cant access to this menu as developer! and I need only mission planing and camera triggering time set by map pilot and other settings will do in DJI pilot if I need. good news for me is, I seen psdk camera live image in Map pilot when I used custom camera with my own image width and... parameters but there is no camera settings(iso,shutter,...) in live image side and Its normal I think.
And other issue I have in M300 with DJI pilot that never seen P4 pro))), When rc signal lost M300 will RTH and very bad! but in P4P and M2P and... mission will continue without RC signal and it was great but M300 when I used timed image triggering It returned to home without RC signal!

Please sync your mission plans and log files so we can see them. Or let us know what version of Map Pilot Pro you were using and email us the .mme file for that missions. 

I tried to use P1 in MP pro 5.2 but I seen this error!!!

Dear Zane,

I think Map Pilot Pro need a M300(PSDK) camera in settings, that can have all M300 features but user dont need to camera settings in Map Pilot pro! Please add this camera type in settings that can support up to 65000 waypoints and other matrice 300 features and with a custom camera parameters in settings page.

As noted previously the M300 is only able to be used with the Elite subscription level. We are granting temporary access for beta testing but need to know your account. 

Please sync your log files and email us with your account username so we can see your data. That is part of being a beta tester.

You should be using the 'Custom Camera' setting so you can define the image footprint so Map Pilot Pro can design the flight appropriately for the designated overlap. 

We will likely still just allow 100 waypoints to be loaded for a while until we get some new things set up for DJI Waypoint 2.0 system. Even with the M300's long battery life it is pretty hard to need more than 100 waypoints. Missions can have unlimited waypoints but for the time being you will only be able to load 100 at a time until we make changes.  

What do you currently have selected in the Settings that shows the video feed during flight?

I would like to try the beta version of your product with the M300. I tried to use a link I saw in a thread for test pilot but it says beta testing not available. Does my account need to be approved? I am new to Map Pilot Pro

VolantDrone: The beta was closed a while ago and public support for the M300 has been released as of version 5.2.0.