Official comment
Micasense was not interested in being a supported camera so you will just have to use the Custom Camera settings and handle triggering on your own.
Has anyone used Micasense sensors with Map Pilot? I am using a 10 band sensor mounted on a dji inspire 2 with the standard dji integration. The drone flies but images are not triggered in the sensor.
Micasense was not interested in being a supported camera so you will just have to use the Custom Camera settings and handle triggering on your own.
Please sign in to leave a comment.
I use Map Pilot to plan the mission for my Matrice 100 (and trigger the onboard Zenmuse X3 camera) and independently set up timed capture with the Micasense Rededge3 camera, which is co-mounted.
I'd love to learn whether DronesMadeEasy has implemented a way to trigger the Micasense camera using Map Pilot though!
I have been using Micasense 10 band system for several years now and utilizing Map Pilot for their terrain aware. The dual camera is mounted on my M-100. The sensor is triggered by Micasense's software, I primarily use aircraft altitude to start and stop the sensor. You will have to connect to the sensor in the field via bluetooth
Hi, what is the Pixel Pitch value that I must add in Custom Camera settings to use a MicaSense RedEdge-MX camera?
Many thanks for your answer.
Your Micasense product datasheet probably has this information.