New to the site/app and drone mapping in general.
using a Phantom 4 Pro v2
Would like to know what camera settings are used by the app, focal length, sensor width(mm), sensor width(pixels), sensor height(mm), sensor height(pixels).
Does the app use the same settings for a given drone, regardless of fight altitude/height?
Is there away to retrieve car racing’s settings from the app?
any help would greatly be appreciated.
Please sign in to leave a comment.
You don't need to set any of those things using Map Pilot and can select the Phantom 4 Pro in our Point Estimator directly.
Every aircraft/camera will have its own setting that depend on the sensor and lens that is used.
No clue what "car racing’s settings" is...
I understand when using the app I do not have to set those values, I just want to know what camera settings are being used by the app.
i.e. Phantom 4 Pro v2 = focal length of 7mm, sensor width 11 mm, etc.
I don't know what car racing settings are either!! Autocorrect am guessing.
Is there a way to retrieve the flight data/settings from the app?
These values can be found in the Point Estimator.
It is pretty easy to see the flight settings in the app.
Below is a screen shot of a saved my mission with the drone connected.
Please point out where I find the camera/sensor settings used durning flight.
https://www.mapsmadeeasy.com/point_estimator
This information is not available in Map Pilot.
Zane May I ask, are you employed by the owners of this app or are you the owner of this app?
I do a lot of the support for certain subsets of users and do a lot of the testing for this app.
