Today I did my first automatic flight with mini3 pro. There was no problem with the connection. I have a few questions. Do the obstacle avoidance sensors work while flying with this program? After the drone first took off, it wobbled slightly from side to side for about 30 meters and reached the flight altitude of 100 meters. Do you have an explanation for this wobble?
Last question: After the mission is over, the drone hangs at the target height and waits and from there I manually lower it. Shouldn't the drone have descended to a distance close to where it first took off? And my last question. The mini pro3 camera is 48 mp. However, the quality of the images taken by the drone is about 12 mp. What should I do to increase this quality?
Please sign in to leave a comment.
Map Pilot Pro does not disable the obstacle avoidance sensors but they do cause a lot of issues during automated flight. We recommend disabling them yourself in the DJI app.
Make sure you are using the most up to date version of Map Pilot Pro. This was an issue with an older version.
That sensor is really on 12 megapixels. The 48 MP images are kind of faked. Only the real pixels should be used for photogrammetry.
I downloaded the "e" version apk file in the article about mini3 pro on your page and ran the program. And an application called DJI Pilot 2 opened. I performed the autonomous flight process from here. I downloaded the correct program, didn't I?
No. Fully close all other drone related apps after doing a quick test flight and open Map Pilot Pro.
Map pilot pro on google play does not load on my phone. When I install with apk version 2.1.1.b for mini3 pro, it does not allow mini3pro to be selected in drone selection. Under these conditions, I can only load the program with 2.1.1.e apk file. The name of this application is dji pilot 2. So if you have an android phone, I would be glad if you could try it. My mobile phone is samsung a35 5g
