Post

2 followers Follow
0
Avatar

Drone won't fly mission

Set up mission, Air2S drone software updated prior to flight.

In Maps Made Easy, selected mission, and then had a new question post that I had not seen before.  Told me that DJI sign in required, or else the drone would not respond, so I did sign in to DJI.

Next, in Maps Made Easy, when I selected the Upload arrow, I got the following 2 questions.

1)  Terrain Awareness.  Would you like to adjust the elevations to account for terrain changes?  Current source "Copernicus" (98.42ft/px)  I answered NO.

2) Flight Over Maximum Altitude.  Would you like Map Pilot to adjust this setting?  NO

I could not get past these questions to proceed to fly the drone.  The Upload button was always "greyed out".

John Halvorsen

Please sign in to leave a comment.

2 comments

0
Avatar

DJI has made it so the aircraft will not be able to fly more than 30 meters up or 50 meters away unless you are logged in. You ran into this issue back in June. 

So our most recent releases have tried to enforce being logged in. 

The Terrain Awareness question has always been there. 

For the maximum altitude, there are limits to how high you can program the aircraft to fly. I would say based on some of your other flights you might be coming close to this limit. Try taking it down a bit. 

The correct answer for the maximum Altitude question was YES. Otherwise you aren't going to be able to fly. 

Zane 0 votes
Comment actions Permalink
0
Avatar

The question about the maximum altitude setting was to check if you want Map Pilot Pro to adjust the value that is currently set on the aircraft. The flight you have designed is higher than the aircraft currently maximum altitude value. It does not change the height of the flight.

Zane 0 votes
Comment actions Permalink