If I have a "T" shaped property I want to map. To my knowledge/experience, that is not possible with the drone mapping app in one mission. So could I do two missions with that, and then upload both mission photos to the mapping software to get returned a single "T" shaped map?
(I asked this in a different thread, but thought i should probably create a new post for this one.)
You are correct. You can set up your T in two separate missions and upload all of the images together to stitch them into one job. The inside (concave) portions of the T won't get trimmed though and might have some slightly jagged edges.
Please sign in to leave a comment.
Awesome! Thanks for the reply. I'm about to upload two files now with 619 photos taken from about 130 ft up. Currently there are trees on the property going up to about 80ft high, but they are all without leaves. I just now saw that the guidelines recommend being 4x higher than the tallest object.
Guess I'll just go through with it and see how it works. Wanting to do as many tests as possible now so that I can really figure out the best way to use this.
thanks agian
Not that we actually recommend doing it but concave survey area layouts are available in 3.1.0 which was released today.
