Update History

5.4.8 - July 2, 2022

• Fixed Mavic Pro mission recall issue

5.4.7 - June 16, 2022

• Added correct units to Mission Plans list
• Fixed hovering issue with Virtual Stick control aircraft at the top of the initial climb

5.4.6 - May 29, 2022

• Optimized Virtual Stick controls
• Added warning that touching the sticks will abort Virtual Stick mission
• Added mode switch alert in Virtual Stick flight
• Added references to TNS remote for Air 2, Air2S and Mini 2
• Added nearby terrain sources to saved mission plan display
• Fixed Home Point double tap vs GPS fix dead zone
• Fixed slow terrain plot calculation on older devices by unselecting 3rd Party base map
• Added RTK to Phantom 4 Pro camera selection in Settings
• Fixed video mission loading from saved mission to reflect narrower FOV
• Hid STI toggle on video mission
• Hid STI on mission types that do not make sense with STI
• Removed STI from saved defaults
• Added 'Photo' marks in log files for STI triggered images

5.4.5 - May 7, 2022

• Fixed survey speed adjustment on Virtual Stick flights
• Fixed Mavic Air 2 and Mavic Air 2S RAW setting. Now collects RAW and JPG since just RAW isn't valid.

5.4.4 - May 2, 2022

• Fixed Movable Home Point Setting issue.
• Fixed Linear STI mission corner waypoints issue.
• Added message for unsupported aircraft in Data Transfer screen.
• Fixed Terrain Aware simulator issue on with Virtual Stick controls.
• Added default value for feature names when import KML as a boundary.
• Changed Terrain Awareness plot close text to Dismiss from Reject when not uploading waypoints.

5.4.3 - April 14, 2022

• Fixed RTH/Pause buttons for Virtual Stick flights
• Fixed "Work Mode" error for Mavic Air 2, Air 2S and Mini 2
• Added light based speed adjustment for Virtual Stick flights
• Fixed units setting for GSD display
• Fixed Mavic Mini 2 video preview
• Fixed Virtual Stick flight hovering after takeoff - now only RC switch will switch OUT of Virtual Stick mode
• Added FPV camera as a video source for M300 with Custom Camera selected

5.4.2 - April 5, 2022

• Added Mavic Air 2S and Mavic Mini 2 Support
• Added Ground Smear Limit setting
• Fixed Linear Mission Ground Offset
• Added Ground Offset to Log Files
• Fixed in/px GSD readout

5.4.1 - March 25, 2022

• Added Speed Adjustment for Lighting Conditions to Virtual Stick flights
• Added PAF switch name to M100
• Fixed camera mode bug - ISO now updates its value in the table even in Auto mode
• Fixed area calculation to use polygon instead of bounding box

5.4.0 - February 28, 2022

• Added Virtual Stick Controls - Mavic Air 2
• Added Force Virtual Stick toggle in the Advanced Settings
• Added VS Target black dot when Forced Virtual Stick used
• Updated Autel SDK - no more internet requirement - Internet is still required on first connection to check registration
• Added User Maps to base map options
• Changed 'Images' to 'JPG Images' in data format
• Fixed timed imaging bug
• Fixed battery count estimator
• Fixed misplaced Abandonment Point issue
• Fixed issue with Connectionless flight speed
• Fixed survey area area calculations
• Removed redundant flight rotation message
• Removed target offset message
• Removed swipe gesture to adjust the number of passes in a linear mission
• Fixed Inspire 1 remote issue
• Fixed KML "import error"- now says "success" when importing from the inbox
• Added location check for (0,0) when starting to prohibit "too many waypoints error"

5.3.1 - February 14, 2022

• Fixed long flight lines waypoints bug
• Hid STI toggle when in mission types that don't support it (i.e. Grid and Spot Check)
• Fixed video recording dot
• Added RTK and M300 flight start error message to check DJI Pilot and the RTK section before proceeding in Map Pilot Pro
• Fixed Camera Busy message on certain error types

5.3.0 - January 14, 2022

• Added Stop To Image feature (STI) for zero smear imaging
  • Works with DJI Drones (not Autel drones)
  • Works with all mission types except Spot Check and Grid
• Fixed Mission Plan syncing precision
• Added mission icon generation from Flight 1 uploads
• Fixed connection timeout issue
• Optimized CPU usage during peak events
  • Camera preview hidden to conserve CPU
  • iPad Mini 4 turns off video preview when uploading mission to conserve CPU
• Fixed flight dimensions to make more sense - based off largest latitude and longitude difference
• Added device storage space warning under 200MB
• Fixed power transmission lines display

5.2.1 - December 7, 2021

• Fixed video format setting
• Fixed X7 focal length setting
• Fixed connection timer reset
• Fixed background connection issue
• Fixed idle timer

5.2.0 - November 20, 2021

• Added H20T, H20 Support (Multiple lenses)
• Added P1 Support
• Added M300RTK support
• Added Thermal settings when in Thermal FPV
• Added Isothermal range
• Added Thermal Gain mode
• Added Thermal Palette Selection
• Added Mission Plan title editing
• Added Location Search
• Fixed Mission Plan Saving references “Mission Plan” rather than “Flight path” to be consistent
• Added checkmarks to the File Manager for flight logs
• Added Autel White Balance and Gimbal Angle Settings
• Added Autel Focus and Exposure alert saying it is not supported yet
• Fixed “Storage Error” to now say “Please check the SD card ...”
• Fixed unlock button hide/show is more consistent with upload and flight start failures
• Fixed deletion of manual abandonment point not resetting the flight index to 0
• Added Data Transfer RAW alert for data capture format RAW
• Added Flight Log Auto Deletion Setting after 3 days of flight log sync
• Added alert to appear one time in File Manager to notify users of deletion change
• Added support of iPhone 12 and 13 screens with notches
• Fixed active imported files limit
• Fixed vague “over limit of 5 files allowed” when there is only one file left in the table
• Added 45 min flight time limit for M300
• Added Autel 30 min
• Added M2XX 35 min
• Fixed Mavic2Dual crash after loading

5.1.4 - November 10, 2021

• Fixed 'Focus Failed' vs 'Focus Success' in log files
• Fixed battery cell voltage precision and Remote Percentage in flight log
• Adjusted missing components to not block usage
• Added missing component message in “Aircraft Errors” and the log file

5.1.3 - November 3, 2021

• Fixed Gimbal angle setting
• Fixed Focus value update
• Fixed Phantom 3 connection issues

5.1.2 - November 1, 2021

• Fixed AGL readout issue
• Fixed Mission Plan list update issue
• Added KML files to Flight Sync
• Added EVORTK to Pro service level
• Removed Format SD Card button, added applicable prompt to pre-flight

5.1.1 - October 23, 2021

• Fixed Mavic 2 Pro crashing issue
• Fixed Autofocus overriding manual
• Added Focus to Inherit settings group
• Added more display levels for custom terrain data

5.1.0 - October 21, 2021

• Added Autel EVO II support for Base, Pro and Dual models - always requires Internet to connect
• Added Automatic Aircraft/Camera Detection.
• Added Thermal camera switching.
• Added initial connection Internet requirement message.

5.0.11 - September 17, 2021

• Fixed triggering issue

5.0.10 - August 24, 2021

• Fixed Custom Camera to allow decimal values
• Fixed Custom Camera error loop
• Added Flight Data Only warning to Mission Plan syncing screen
• Adjusted minimum flight altitude down to 2m for Spot Check and Sampling missions (BE CAREFUL)
• Adjusted maximum flight altitude up to 500m

5.0.9 - August 11, 2021

• Added imperial units for low altitude warning
• Fixed .MME file import to get rid of clashing UUIDs
• Fixed focus ring value update when in Auto
• Changed Focus Mode default to Auto instead of Manual when using a fresh installation
• Fixed Focus Mode defaults
• Added multiple selection for Mission Plan deletion
• Change orange color for continuity
• Fixed non-zero ground offset value when using Imperial units
• Extended custom camera max values to 12,000

5.0.8 - July 19, 2021

• Fixed Ground Level Offset to behave appropriately
• Fixed all flights in the same mission to all be the same speed
• Added VisionSys: Dangerous in the Aircraft Error panel
• Fixed Go Home height pre-flight check issue
• Fixed Spot Check Go Home height check to use safe height altitude, rather then survey height altitude
• Removed extra “Slow Flight based on light speed adjustment” setting in the Settings

5.0.7 - July 1, 2021

• Added Return to Home Offset in Settings
• Changed Return to Home height to either honor the aircraft's current value or apply the offset to the flight altitude
• Added Inherit Camera Settings to Settings
• Fixed Camera Settings logic for inheriting existing values
• Added support for Elite plan
• Fixed clear cache data message
• Changed Aircraft Errors display to show age of messages instead of timestamp
• Hid startup error messages from Aircraft Errors panel
• Added Focus Mode and Ring value to the Exposure text in the Camera Preview
• Fixed job submission point logic
• Fixed spelling and grammar errors

5.0.6 - June 10, 2021

• Added RAW imaging back into proper level
• Added “Corner Radius Invalid” alert in Mission Upload when that is the issue
• Changed minimum altitude to 2 meters
• Added pre-flight check for low mission altitude when less than 5 meters
• Added Partial Terrain Data alert for data holes
• Fixed Log In buttons in Settings so they are accessible from entire cell’s frame
• Fixed Camera Exposure (mode, Shutter, iso, aperture) settings memory between flights/missions

5.0.5 - May 14, 2021

• Fixed mission user maximum speed in saved missions
• Fixed mission saving for free users
• Increased sun angle warning period
• Fixed estimated battery count logic
• Added mini map cell to active area in list views
• Added Ninja OBC commands for better timeout error handling
• Fixed Ninja OBC command timeout display
• Fixed spelling and grammar in some messages
• Fixed 3rd Party Data default crash

5.0.4 - April 20, 2021

• Added Individual Image Offsets to Quick Maps
• Synchronized Image Selection passing between Data Transfer and Quick Maps
• Disabled deselection of Ground Reference images
• Added uploading individual offsets for Flat Map submission to MME
• Fixed reload flight pass algorithm when selecting images in Quick Maps
• Added a new sections in Quick Maps for Data Previews
• Added Log In request for when not logged in instead of showing error
• Fixed Sync button in File Manager and Mission Plans
• Fixed long press on camera view Ninja OBC systems
• Updated Location Privacy Strings

5.0.3 - March 31, 2021

• Changed Quick Map Pass Detection to 25 degree for drone yaw
• Added DEM selection centering and zooming to the DEM
• Updated privacy settings strings in plist
• Added default values for KMLPolygon and KMLPolyline if colors are nil
• Added file removal from inbox if import fails
• Added file sorting by creation date in File Manager
• Added percentages in Sampling Rate panel
• Fixed Spot Check missions to have correct estimate images
• Fixed layout detail panel to reset when there is no flight path possible
• Added version update notices
• Fixed AirData logout
• Fixed syncing log files to upload flights flown prior to logging in (for AirData and DroneLogbook)
• Added ability to sync single files with swipe left
• Added check marks that appear on MME flight sync after syncing, without leaving file manager

5.0.2 - March 17, 2021

• Restyled alerts for “Mapping Completed” and “Mission Finished”
• Added commas to Points and Image count numbers
• Added Star Ratings & feedback implementation
• Fixed ActiveConnect for Sampling missions
• Fixed AutoWB for Sampling Missions
• Fixed Privacy statements for Bluetooth, microphone and Media Library access

5.0.1 - March 12, 2021

• Fixed No Fly Zone Control view
• Fixed Dark Mode on Mission Plans
• Hid Home Bar
• Fixed Terrain Awareness/Linear logging
• Fixed overlapping text in Terrain Aware panel
• Fixed camera setting button size on iPad
• Fixed background operation related crash
• Added Do Not Show checkbox to Safety Alert
• Added mini maps to boundary display
• Added number of linear passes to saved values

5.0.0 - March 10, 2021 - Final Release

• Initial Release