Using Map Pilot with MicaSense Cameras

Has anyone used Micasense sensors with Map Pilot? I am using a 10 band sensor mounted on a dji inspire 2 with the standard dji integration. The drone flies but images are not triggered in the sensor.

Mason Lanphear 12. Juni 2020 01:07

Offizieller Kommentar

Micasense was not interested in being a supported camera so you will just have to use the Custom Camera settings and handle triggering on your own.

Zane 22. Juli 2020 23:19

Bitte melden Sie sich an, um einen Kommentar zu hinterlassen.

5 Kommentare

I use Map Pilot to plan the mission for my Matrice 100 (and trigger the onboard Zenmuse X3 camera) and independently set up timed capture with the Micasense Rededge3 camera, which is co-mounted.

I'd love to learn whether DronesMadeEasy has implemented a way to trigger the Micasense camera using Map Pilot though!

Michael Koontz 21. Juli 2020 20:28 0 Stimmen

I have been using Micasense 10 band system for several years now and utilizing Map Pilot for their terrain aware. The dual camera is mounted on my M-100. The sensor is triggered by Micasense's software, I primarily use aircraft altitude to start and stop the sensor. You will have to connect to the sensor in the field via bluetooth

bart bauer 13. Oktober 2021 18:31 0 Stimmen

Hi, what is the Pixel Pitch value that I must add in Custom Camera settings to use a MicaSense RedEdge-MX camera?

Many thanks for your answer.

Gabriel Alejandro Goyanes 31. Mai 2022 12:41 0 Stimmen

Your Micasense product datasheet probably has this information.

Zane 31. Mai 2022 15:09 0 Stimmen